Making the install script into a command#

initial_setup.sh

-#!/bin/bash
-# This script installs the Debian image to the microSD card, and should
-# be run on your laptop/desktop with the microSD card plugged in.
-
-# License
-# =======
-#
-# Copyright (C) 2014-2015 Bob Mottram <bob@robotics.uk.to>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# Version number of this script
-VERSION="1.00"
-
-# typically /dev/sdb or /dev/sdc, depending upon how
-# many drives there are on your system
-MICROSD_DRIVE=$1
-
-# IP address of the router (gateway)
-ROUTER_IP_ADDRESS="192.168.1.254"
-
-# The fixed IP address of the Beaglebone Black on your local network
-BBB_FIXED_IP_ADDRESS="192.168.1.55"
-
-MICROSD_MOUNT_POINT="/media/$USER"
-
-DEBIAN_FILE_NAME="debian-jessie-console-armhf-2014-08-13"
-
-# Downloads for the Debian installer
-DOWNLOAD_LINK1="https://rcn-ee.net/deb/rootfs/jessie/$DEBIAN_FILE_NAME.tar.xz"
-DOWNLOAD_LINK2="http://ynezz.ibawizard.net/beagleboard/jessie/$DEBIAN_FILE_NAME.tar.xz"
-
-if [ ! MICROSD_DRIVE ]; then
-	echo 'You need to specify a drive for the connected microSD.'
-	echo 'This can most easily be found by removing the microSD, then'
-	echo 'running:'
-	echo ''
-	echo '  ls /dev/sd*'
-	echo ''
-	echo 'Then plugging the microSD back in and entering the same command again'
-	exit 1
-fi
-
-if [ ! -b ${MICROSD_DRIVE}1 ]; then
-	echo "The microSD drive could not be found at ${MICROSD_DRIVE}1"
-	exit 2
-fi
-
-if [ ! -d ~/freedombone ]; then
-	mkdir ~/freedombone
-fi
-cd ~/freedombone
-if [ ! -f ~/freedombone/$DEBIAN_FILE_NAME.tar.xz ]; then
-	wget $DOWNLOAD_LINK1
-fi
-if [ ! -f ~/freedombone/$DEBIAN_FILE_NAME.tar.xz ]; then
-	# try another site
-    wget $DOWNLOAD_LINK2
-	if [ ! -f ~/freedombone/$DEBIAN_FILE_NAME.tar.xz ]; then
-		echo 'The Debian installer could not be downloaded'
-		exit 3
-	fi
-fi
-
-echo 'Extracting files...'
-tar xJf $DEBIAN_FILE_NAME.tar.xz
-if [ ! -d ~/freedombone/$DEBIAN_FILE_NAME ]; then
-	echo "Couldn't extract files"
-	exit 4
-fi
-cd $DEBIAN_FILE_NAME
-sudo ./setup_sdcard.sh --mmc $MICROSD_DRIVE --dtb beaglebone
-
-echo ''
-echo ''
-read -p "Eject the microSD card, re-insert it and wait a minute for it to mount, then press any key to continue... " -n1 -s
-
-if [ ! -b ${MICROSD_DRIVE}1 ]; then
-	echo ''
-	echo "The microSD drive could not be found at ${MICROSD_DRIVE}1"
-	read -p "Wait for the drive to mount then press any key... " -n1 -s
-	if [ ! -b ${MICROSD_DRIVE}1 ]; then
-		echo "microSD drive not found at ${MICROSD_DRIVE}1"
-		exit 5
-	fi
-fi
-
-sudo cp $MICROSD_MOUNT_POINT/BOOT/bbb-uEnv.txt $MICROSD_MOUNT_POINT/BOOT/uEnv.txt
-
-sudo sed -i 's/iface eth0 inet dhcp/iface eth0 inet static/g' $MICROSD_MOUNT_POINT/rootfs/etc/network/interfaces
-sudo sed -i '/iface eth0 inet static/a\    dns-nameservers 213.73.91.35 85.214.20.141' $MICROSD_MOUNT_POINT/rootfs/etc/network/interfaces
-sudo sed -i "/iface eth0 inet static/a\    gateway $ROUTER_IP_ADDRESS" $MICROSD_MOUNT_POINT/rootfs/etc/network/interfaces
-sudo sed -i '/iface eth0 inet static/a\    netmask 255.255.255.0' $MICROSD_MOUNT_POINT/rootfs/etc/network/interfaces
-sudo sed -i "/iface eth0 inet static/a\    address $BBB_FIXED_IP_ADDRESS" $MICROSD_MOUNT_POINT/rootfs/etc/network/interfaces
-sudo sed -i '/iface usb0 inet static/,/    gateway 192.168.7.1/ s/^/#/' $MICROSD_MOUNT_POINT/rootfs/etc/network/interfaces
-
-sudo sed -i 's/nameserver.*/nameserver 213.73.91.35/g' $MICROSD_MOUNT_POINT/rootfs/etc/resolv.conf
-sudo sed -i '/nameserver 213.73.91.35/a\nameserver 85.214.20.141' $MICROSD_MOUNT_POINT/rootfs/etc/resolv.conf
-
-clear
-echo '*** Initial microSD card setup is complete ***'
-echo ''
-echo 'The microSD card can now be removed and inserted into the Beaglebone Black.'
-echo 'Once the Beaglebone has booted then you can log in with:'
-echo ''
-echo "    ssh debian@$BBB_FIXED_IP_ADDRESS"
-echo ''
-echo 'The password is "temppwd". You can then become the root user by typing:'
-echo ''
-echo '    su'
-echo ''
-echo 'Using the password "root". Change the root user password by typing:'
-echo ''
-echo '    passwd'
-echo ''
-echo "If you can't log in as root then try typing 'exit' and then:"
-echo ''
-echo "    ssh root@$BBB_FIXED_IP_ADDRESS"
-echo ''
-echo 'Then create a user for the system with:'
-echo ''
-echo '    adduser [username]'
-echo ''
-echo 'Enter the command "exit" a couple of times to get back to your main system'
-echo 'then log back in as the user you just created with:'
-echo ''
-echo '    ssh [username]@$BBB_FIXED_IP_ADDRESS'
-echo ''
-echo 'and use the "su" command to become the root user again. You can then load'
-echo 'the freedombone main installation script with:'
-echo ''
-echo '    apt-get -y install git'
-echo '    git clone https://github.com/bashrc/freedombone.git'
-echo '    cd freedombone'
-echo ''
-echo 'Finally you can run the freedombone installer with:'
-echo ''
-echo '    ./install-freedombone.sh [domain] [username] [subdomain code] [variant]'
-exit 0