freedombone-image-hardware-setup

#!/bin/sh
#  _____               _           _
# |   __|___ ___ ___ _| |___ _____| |_ ___ ___ ___
# |   __|  _| -_| -_| . | . |     | . | . |   | -_|
# |__|  |_| |___|___|___|___|_|_|_|___|___|_|_|___|
#
#                              Freedom in the Cloud
#
# Hardware setup based on bin/freedombox-hardware-setup from freedom-maker
#
# License
# =======
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU Affero General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU Affero General Public License for more details.
#
# You should have received a copy of the GNU Affero General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

PROJECT_NAME='freedombone'

export TEXTDOMAIN=${PROJECT_NAME}-image-hardware-setup
export TEXTDOMAINDIR="/usr/share/locale"

INSTALL_PACKAGES='apt-get -yq install'

enable_serial_console() {
    # By default, spawn a console on the serial port
    device="$1"
    echo "Adding a getty on the serial port"
    echo "T0:12345:respawn:/sbin/getty -L $device 115200 vt100" >> /etc/inittab
}

beaglebone_flash() {
    # allow flash-kernel to work without valid /proc contents
    # ** this doesn't *really* work, since there are too many checks
    #    that fail in an emulated environment!  We'll have to do it by
    #    hand below anyway...
    export FK_MACHINE="$1"
    if ! $INSTALL_PACKAGES flash-kernel; then
        echo "Unable to flash kernel for $FK_MACHINE"
        exit 64
    fi
}

beaglebone_repack_kernel() {
    beaglebone_variant="$1"
    # process installed kernel to create uImage, uInitrd, dtb
    # using flash-kernel would be a good approach, except it fails in the
    # cross build environment due to too many environment checks...
    #FK_MACHINE="TI AM335x BeagleBone" flash-kernel
    #  so, let's do it manually...

    # flash-kernel's hook-functions provided to mkinitramfs have the
    # unfortunate side-effect of creating /conf/param.conf in the initrd
    # when run from our emulated chroot environment, which means our root=
    # on the kernel command line is completely ignored!  repack the initrd
    # to remove this evil...

    echo "info: repacking beaglebone kernel and initrd"

    bbb_dtb="$beaglebone_variant"

    # shellcheck disable=SC2012,SC2086
    kernelVersion=$(ls /usr/lib/*/${bbb_dtb}.dtb | head -1 | cut -d/ -f4)
    version=$(echo "$kernelVersion" | sed 's/linux-image-\(.*\)/\1/')
    initRd=initrd.img-$version
    vmlinuz=vmlinuz-$version

    # optionally use a separately compiled kernel
    bbb_dtb_file=/usr/lib/$kernelVersion/${bbb_dtb}.dtb
    #if [ -f /boot/bbb.tar.gz ]; then
    #    cd /boot
    #    tar -xzvf /boot/bbb.tar.gz
    #    if [ -f /boot/bbb/dtbs/${bbb_dtb}.dtb ]; then
    #        if [ -f /boot/bbb/zImage ]; then
    #            bbb_dtb_file=/boot/bbb/dtbs/${bbb_dtb}.dtb
    #            vmlinuz=/boot/bbb/zImage
    #        fi
    #    fi
    #fi

    mkdir /tmp/initrd-repack

    (cd /tmp/initrd-repack || exit 24 ; \
     zcat "/boot/$initRd" | cpio -i ; \
     rm -f conf/param.conf ; \
     find . | cpio --quiet -o -H newc | \
         gzip -9 > "/boot/$initRd" )

    rm -rf /tmp/initrd-repack

    (cd /boot || exit 24 ; \
     cp "${bbb_dtb_file}" dtb ; \
     cat "$vmlinuz" dtb >> temp-kernel ; \
     mkimage -A arm -O linux -T kernel -n "Debian kernel ${version}" \
             -C none -a 0x82000000 -e 0x82000000 -d temp-kernel uImage ; \
     rm -f temp-kernel ; \
     mkimage -A arm -O linux -T ramdisk -C gzip -a 0x88080000 -e 0x88080000 \
             -n "Debian ramdisk ${version}" \
             -d "$initRd" uInitrd )
}

setup_flash_kernel() {
    if [ ! -d /etc/flash-kernel ] ; then
       mkdir /etc/flash-kernel
    fi
    printf "%s" "$1" > /etc/flash-kernel/machine

    command_line=""
    if [ -n "$2" ] ; then
        command_line="console=$2"
    fi

    if [ -n "$command_line" ] ; then
        echo "flash-kernel flash-kernel/linux_cmdline string \"$command_line\"" | debconf-set-selections
    fi

    $INSTALL_PACKAGES flash-kernel
}

arm_setup_boot() {
    dtb="$1"
    arm_root_device='mmcblk0p2'
    if [ "$EXTERNAL_DRIVE" ]; then
        arm_root_device="$EXTERNAL_DRIVE"
    fi

    arm_flash_name=
    if [ "$2" ]; then
        arm_flash_name="$2"
    fi

    # Setup boot.cmd
    if grep -q btrfs /etc/fstab ; then
        fstype=btrfs
    else
        fstype=ext4
    fi

    # shellcheck disable=SC2012,SC2086
    kernelVersion=$(ls /usr/lib/*/${dtb}.dtb | head -1 | cut -d/ -f4)
    version=$(echo "$kernelVersion" | sed 's/linux-image-\(.*\)/\1/')
    initRd=initrd.img-$version
    vmlinuz=vmlinuz-$version

    arm_loadaddr='0x46000000'
    arm_initrd_addr='0x48000000'
    arm_fdtaddr='0x47000000'
    arm_boot_script=/boot/boot.cmd
    arm_boot_device=mmc
    arm_boot_start=
    arm_boot_dev=

    case "$dtb" in
        "am"*) arm_loadaddr='0x82000000'
               arm_initrd_addr='0x88080000'
               arm_fdtaddr='0x88000000'
               arm_boot_script=/boot/uEnv.txt
               if [ "$EXTERNAL_DRIVE" ]; then
                   arm_boot_dev='bootdev=0:1'
                   arm_boot_device=usb
                   arm_loadaddr='0x80300000'
                   arm_initrd_addr='0x81600000'
                   arm_fdtaddr='0x815f0000'
                   arm_boot_start='usb start; '
               fi
               ;;
    esac

    case "$dtb" in
        "am"*) cat >> $arm_boot_script <<EOF
mmcroot=/dev/${arm_root_device} ro
mmcrootfstype=$fstype rootwait fixrtc
mmcrootflags=subvol=@
${arm_boot_dev}

console=ttyO0,115200n8

kernel_file=$vmlinuz
initrd_file=$initRd

loadaddr=$arm_loadaddr
initrd_addr=$arm_initrd_addr
fdtaddr=$arm_fdtaddr

initrd_high=0xffffffff
fdt_high=0xffffffff

loadkernel=load ${arm_boot_device} \${mmcdev}:\${mmcpart} \${loadaddr} \${kernel_file}
loadinitrd=load ${arm_boot_device} \${mmcdev}:\${mmcpart} \${initrd_addr} \${initrd_file}; setenv initrd_size \${filesize}
loadfdt=load ${arm_boot_device} \${mmcdev}:\${mmcpart} \${fdtaddr} /dtbs/\${fdtfile}

loadfiles=run loadkernel; run loadinitrd; run loadfdt
mmcargs=setenv bootargs init=/lib/systemd/systemd console=tty0 console=\${console} root=\${mmcroot} rootfstype=\${mmcrootfstype} rootflags=\${mmcrootflags} ifnames=0 slub_debug=FZP slab_nomerge page_poison=1

uenvcmd=${arm_boot_start}run loadfiles; run mmcargs; bootz \${loadaddr} \${initrd_addr}:\${initrd_size} \${fdtaddr}
EOF
               ;;
        *) cat >> $arm_boot_script <<EOF
setenv mmcdev 0
setenv mmcpart 1

setenv mmcroot /dev/${arm_root_device} ro
setenv mmcrootfstype $fstype rootwait fixrtc
setenv mmcrootflags subvol=@
${arm_boot_dev}

setenv console ttyS0,115200n8

setenv kernel_file $vmlinuz
setenv initrd_file $initRd
setenv fdtfile $dtb

setenv loadaddr $arm_loadaddr
setenv initrd_addr $arm_initrd_addr
setenv fdtaddr $arm_fdtaddr

setenv initrd_high 0xffffffff
setenv fdt_high 0xffffffff

setenv loadkernel load ${arm_boot_device} \${mmcdev}:\${mmcpart} \${loadaddr} \${kernel_file}
setenv loadinitrd load ${arm_boot_device} \${mmcdev}:\${mmcpart} \${initrd_addr} \${initrd_file}\\; setenv initrd_size \\\${filesize}
setenv loadfdt load ${arm_boot_device} \${mmcdev}:\${mmcpart} \${fdtaddr} /dtbs/\${fdtfile}

setenv loadfiles run loadkernel\\; run loadinitrd\\; run loadfdt
setenv mmcargs setenv bootargs init=/lib/systemd/systemd console=\${console} root=\${mmcroot} rootfstype=\${mmcrootfstype} rootflags=\${mmcrootflags} ifnames=0 slub_debug=FZP slab_nomerge page_poison=1

${arm_boot_start}run loadfiles; run mmcargs; bootz \${loadaddr} \${initrd_addr}:\${initrd_size} \${fdtaddr}
EOF
            ;;
    esac

    mkdir -p /boot/dtbs

    if [ "$arm_boot_script" = "/boot/boot.cmd" ]; then
        # Create boot.scr
        mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr

        # shellcheck disable=SC2086
        cp /usr/lib/$kernelVersion/* /boot/dtbs
    else
        # Copy all DTBs
        cp /usr/lib/linux-image-*-armmp/* /boot/dtbs
    fi


    # extra boot modules
    case "$dtb" in
        "sun"*)
            { echo "rtc_sunxi";
              echo "vfat"; } >> /etc/initramfs-tools/modules
            ;;
        "rock"*) echo "vfat" >> /etc/initramfs-tools/modules
              ;;
    esac

    if [ "$arm_flash_name" ]; then
        case "$arm_flash_name" in
            "TI "*)
                beaglebone_flash "$arm_flash_name"
                beaglebone_repack_kernel "${dtb}"
                ;;
        esac
    fi

    enable_serial_console ttyS0
}

case "$MACHINE" in
    beagleboneblack)
        arm_setup_boot am335x-boneblack "TI AM335x BeagleBone Black"
        ;;
    beaglebonegreen)
        arm_setup_boot am335x-bonegreen "TI AM335x BeagleBone Green"
        ;;
    beaglex15)
        arm_setup_boot am57xx-beagle-x15 "TI AM5728 BeagleBoard-X15"
        ;;
    cubietruck)
        arm_setup_boot sun7i-a20-cubietruck
        ;;
    a20-olinuxino-lime)
        arm_setup_boot sun7i-a20-olinuxino-lime
        ;;
    a20-olinuxino-lime2)
        arm_setup_boot sun7i-a20-olinuxino-lime2
        ;;
    a20-olinuxino-micro)
        arm_setup_boot sun7i-a20-olinuxino-micro
        ;;
    banana-pro)
        arm_setup_boot sun7i-a20-bananapro
        ;;
    cubieboard2)
        arm_setup_boot sun7i-a20-cubieboard2
        ;;
    pcduino3)
        arm_setup_boot sun7i-a20-pcduino3
        ;;
    rock64)
        arm_setup_boot "rockchip/rk3328-rock64"
        ;;
esac